| |
 |
Clean Bee
Quick Quote
|
|
|
Stone, Tile & Grout Cleaning
Natural stone and ceramic tile are
becoming more and more popular. These surfaces are also some
of the most difficult surfaces to keep clean and protected
due to the porous nature and design.
For many, the mop and bucket are the tools of
choice, but this often pushes soil deeper into the grout lines and
into the natural crevices of the stone. Proper cleaning is a
daunting task that can be frustrating and backbreaking.
With new technology we are able to clean with our hot water
extraction system, using high temperature and controlled pressure,
while simultaneously extracting all soil and water. We can even
seal and recolor grout lines, making them sparkle like new. Give our
hard floor experts a call today to keep your floors looking great
year around.
|
Limestone floor before and after. |
Black granite counter top sealed
with color enhancing sealer. |
| |
|
|
1” tile cleaned, with original
soil left for comparison. |
Same 1” tile after cleaned
and grout color stained. |
|
|
|
Exterior stone steps prior to cleaning |
Exterior stone stairs cleaned and
sealed with color enhancing
sealer. |
6 STEP RESTORATION PROCESS
FOR TILE AND GROUT
-
Pre-treat tile and grout
Alkaline based degreasing solution is mopped on
Cleaner is allowed to dwell for up to 20 minutes
This loosens accumulated soil, grease, contaminants and topical
residues
-
Power scrub surfaces
Special surrogated brushes agitate the grout lines as well as the
tile surface
Edge Cleaning and baseboard cleaning are done at this time
-
Turbo power rinse
Tile and grout is pressure rinsed using high pressure heated water
All water, cleaning solutions and contaminants are captured and
extracted away in one process.
System is completely fluid controlled with no over wetting of any
other surfaces or areas
-
Repeat process (Steps 1, 2 and 3 above)
Above process is repeated now using a low Ph Restorative cleaner
Solution works on staining, discoloration, grout haze, soap scum
-
Speed dry/inspection
Remove any remaining water on floor
Place high powered air movers to dry tile and grout lines
Inspect surface for any staining. Spot clean any stains found
-
a. Impregnating Sealer
1-3 coats depending on porosity of surface are applied
Absorbs into pores of surface, creating a barrier against future
staining
Does not change appearance of tile or grout surface, or add a luster
or shine
Excess sealer is buffed off tile and grout after appropriate dwell
time
b. Grout Stain/Colorant
a. Fixes discoloration, staining or unevenness in grout color
b. Can completely change grout to the color or your choice
c. Seals and colors grout in one process
d. Does not affect tile
Note: Grout Stain is an option to replace Step 6a. if desired.
|
|
|
|
